The Datavideo HRS-10HD is a HD-SDI / SDI video assist, editing, monitoring and recording solution that saves valuable time setting up and breaking down gear in the field. The Datavideo HRS-10 includes the compact TLM-700HD monitor and a HDR-40 HD-SDI / SDI hard disk based video recorder. Note
This recorder will not support HDV at 720p. |
Features TBC |
Package Contents - HDR-40 hard disk based video recorder
- TLM-700HD 7 inch 16:9 LCD Field Monitor
- AD switch 12V / 5A with 4P-F XLR connector
- DV file converter software on CD-ROM disk
- AC Power cord (Australian Plug)
- 2 x 2.5" hard disk drive enclosure (one with a fitted 320GB HDD and the second with out HDD fitted)
- 2 x Mini XLR 3P-F to XLR 3P-M 60cm cable
- 2 x Mini XLR 3P-F to XLR 3P-F 60cm cable
- Y type USB cable
- HDR-40 instruction manual
- HRS-10 instruction manual
- TLM-700HD instruction manual
- Carry bay with strap
|
TLM-700HD Specifications | Size | 7" Wide Screen Panel |
|---|
| Resolution | 800 x 480 pixels (2400 x 480 dots) |
|---|
| Viewing Angle | Vertical: +60/-40 degrees
Horizontal: +60/-60 degrees |
|---|
| Brightness | 350cd/m2 |
|---|
| Contrast Ratio | 500:1 |
|---|
| Adjustments | Brightness, Contrast, Saturation, Tint (NTSC only) |
|---|
| Video Standard | PAL / NTSC auto switching |
|---|
| Aspect Ratio | 16:9 / 4:3 switchable |
|---|
| Video Input | 1 x HD-SDI / SD-SDI Input
1 x HDMI Input
1 x Component Input
1 x Composite Input |
|---|
| | Embedded Audio | HD-SDI / SD-SDI, HDMI |
|---|
| | Audio Level Indicators | HD-SDI / SD-SDI, HDMI |
|---|
| Accessories | Power adapter and AC cord |
|---|
| Power Input | 12V DC |
|---|
| Operating Environment | +40 degrees Celsius, Relative Humidity < 90%, Max. 240HR |
|---|
| | Lamp Life | 10,000 hours - defined as the module brightness decreased to 50% of original brightness at Ta=25 degree C (ambient temperature), IL=6mA (lamp current). |
|---|
Dimensions
(including V-Mount plate) | 186.2 x 132 x 68.65mm (WxHxD) |
|---|
| Weight | 1.25kgs |
|---|
|
HDR-40 Specifications Inputs Interface | 1xBNC connector for HD/SD-SDI input
2x XLR connector for audio input | | Outputs Interface | 1x BNC connector for HD/SD-SDI pass through output
1x HDMI connector for HDMI output (1.1) | | Record format | Video MPEG2 (.M2T)
Audio MPEG1 Layer 2
Audio Bit rate 384Kbps
Audio Resolution 16bit | | Other Interface | 1x Mini XLR connector for GPI remote control
1x D-Sub(9 Pin) for RS-422 or RS-232 either one
1x IEEE-1394 Port for connection to PC, MAC and HDV device.
1x Phone plugs for audio monitor output | | Video Input | HD (1080i/50 - 1080/59.94i _�720p/50 _�720/59.94p)
SD (480/59.94i, 576/50i) | HD SDI signal | | SMPTE 292 standard complied with | | | Output return loss | More than 15 dB (5MHz to 750MHz) - More than 10 dB (750MHz to 1.5 GHz) | | Output level | 0.8 Vpp � 10 | | Rise time | Less than 270 ps | | Fall time | Less than 270 ps | | Difference between rise time and fall time within 100 ps | | | Alignment jitter | Less than 0.2 U | | Timing jitter | Less than 1.0 UI | | Eye aperture ratio | More than 90% | | DC offset | 0 � 0.5V | | Equalizer use 5C-FB cable support 100 meters | | | SD SDI signal | SMPTE 259M standard complied with | | | Output return loss | More than 15dB(5MHz to 270MHz) | | Output level | 0.8Vpp � 10 | | Rise time | less than 1.5ns | | Fall time | less than 1.5ns | | Difference between rise time and fall time less than 0.5ns | | | Jitter less than | 0.2 U | | Audio | | Bandwidth | 20~20KHz < +/- 3dB | | S/N Ratio | > 70 dB | | THD | < 0.1% | | Operating Temperature | 0��C to 40��C (32��F to 102��F) | | Humidity | 10% to 90% (non condensing) | | Weight | 3Kgs TBC | | Power | Input AC 100 ~ 240V Switching Adaptor, output DC 12V / 3A |
|
Front and Rear View 
|
Editing M2T files The Datavideo DN-300, 400, 500 recorders, the HDR-40, 50, 100 and 200 recorders and the HRS-10 and HRS-10HD recorders are all FAT32 based with an approximate 2GB file limit and can all record M2T files. There can't be clips longer than 2GB, resulting in multiple files per track. Also, the Open GOP structure of the 1080 stream requires information that is contained in these multiple files to have a contiguous video / audio file. Because of the nature of Open GOP compression, some NLE systems (such as Final Cut Pro) may not combine the M2T files when imported, so this needs to be done prior to import. Datavideo provides a utility called M2T_FileCombine Mac version (285KB) or Windows version (11KB) to combine the M2T files for you. Once your videos are converted, you can then import and view the files on Final Cut Pro. |
