Stand lights

This catalog has no sub-catalogs.

Bebob LULED60VENGPK, 60V Stand Light (V-Mount) with Accessories

The Bebob LUXLED60V is a stand Light that is powered by a V-Mount (or optional) PAG or Anton Bauer batteries for quick and mobile acquisition. The LULED60VENGPK includes the LUXLED60V and yoke,filter holder and barndoors. This light provides high brightness at low power consumption in the field and was developed as a location lamp to be mounted on lighting stands. However an optional LUX-LED40HD hand grip allows the light to be used as a hand lamp.

With an Anton Bauer Dionic 90 i.e. it is possible to power the light for 1.5 hours at full level! The LULED60V also offers a 4pin Canon XLR 12V to 32V power input.

The LED Technology is so efficient that the Lux-Led series emits more light than conventional halogen lights, while consuming considerably less power. For this reason it is possible to support mobile lighting with 60W lights in the field by either normal broadcast batteries or DC support. Utilising available camcorder batteries allows quick actions and set ups while limiting the amount of equipment that has to be taken to location.

Similar to our Lux-Led camera headlights the sophisticated arrangement of selected LEDs allows a step less adjustment of the illumination angle. The lights can also be dimmed while the colour temperature remains in the daylight range. The dimmer is integrated into the housing.

Note:
The image featured on this page shows the optional LUX-LED40HD hand grip.

Features
  • Battery support V-Mount (or optional PAG/AB and 4 pin Canon XLR available)
  • High brightness at low power consumption with 60W
  • based on LED technology
  • Step less focus
  • Colour temperature: Daylight
  • Dimmable without change in colour temperature
  • Lighting control with barn doors, filter hold and mounting yoke.
Specifications
Input voltage: 12-32V
Power consumption 60W
Ambient temperature 20¬°C normal
max. 50¬°C, min. -20¬°C
Humidity (condensed) - 80% rel. humidity.
Diameter (light) 265mm
Width (at back of light) 140mm
Length (including yolk) 255mm
Weight 1.4kg
Power Input 4 pin Canon XLR 12V to 32V
Mounting V-Mount (PAG or AB mounting optional)